Instructions for Ford EXPLORER

Instructions for Ford EXPLORER production to 2001

  • Using the car key switch the “ignition off” and switch the “ignition on” 8 times within 10 seconds. You must end this procedure with key in “ignition ON” position. The locks will lock and unlock fast about 3 times. This means the system is in learn mode.
  • Within 20 seconds press the lock button on all of the remotes you want to program to that vehicle. Door locks will cycle to confirm programming.
  • Within 20 seconds, press any button on second keyless remote. Door locks will cycle again to confirm programming
  • Turn ignition to OFF. Locks will again cycle to indicate end of programming mode.

Instructions for Ford EXPLORER Produced From 2002

  • Close all doors.
  • Open drivers door and press the UNLOCK button on drivers door panel while door is open.
  • Insert key in ignition and turn ignition to ON.
  • Using the car key switch the “ignition off” and switch the “ignition on” 8 times within 10 seconds. You must end this procedure with key in “ignition ON” position. The locks will lock and unlock fast about 3 times. This means the system is in learn mode.
  • Within 20 seconds press the lock button on all of the remotes you want to program to that car. Door locks will cycle to confirm programming.
  • Within 20 seconds, press any button on second keyless remote. Door locks will cycle again to confirm programming
  • Turn ignition to OFF. Locks will again cycle to indicate end of programming mode.

Instructions for Ford Expedition

REMOTE TRANSMITTER
FOR FORD EXPEDITION

How to program remote key for Ford Expedition

  • You must end this procedure with key in “ignition on” position.
  • The locks will lock and unlock fast about 3 times. This means the system is in learn mode.

  • Door locks will cycle to confirm programming.
  • Within 20 seconds, press any button on second keyless remote. Door locks will cycle again to confirm programming
  • Turn ignition to OFF. Locks will again cycle to indicate end of programming mode.

Depending on the model year, activation “remote learning mode”, described in first point, can differ in the amount of turning off/on the ignition ( instead of 8 may be, for example, 5 times ).
Activation “remote learning mode” in vehicle will be indicated by central locking – the locks will lock and unlock fast about 3 times ).

How to program a remote Ford Galaxy Key

REMOTE CONTROL
FORD GALAXY
1997-1999

REMOTE CONTROL
FORD GALAXY
1999-2002

INFRARED REMOTE
CONTROL FORD GALAXY
1995-1997

Instructions for FORD GALAXY from 1995 to July 1997

with infrared remote control

    • Ensure all doors and windows on the vehicle are shut.
    • Insert key into driver’s door lock.
    • Turn the key to the unlock position 3 times ( key must be held in open position by 0.5 seconds )
    • Remove the key.

The driver’s door LED will illuminate. Within 20 seconds:

  • Point the key at the receiver located near the rear view mirror.
  • Press and hold the lock button.
  • Still pressing the lock button – press the unlock button 3 times.
  • Release the lock button.

The driver’s door LED should flash to indicate correct programming. Repeat 4 to 7 for additional remotes up to a maximum of four. Wait 15 seconds before trying remote.

Instructions for FORD GALAXY from 1997 TO 1999

REMOTE CONTROL 5WK4 790/97/98 and others

    • Insert key into driver’s door lock.
    • Turn the key to the unlock position 3 times and keep the key in the lock opening position for 5 sec.
    • Remove the key.

The driver’s door LED will illuminate. Within 20 seconds:

  • Press and hold the lock button.
  • Still pressing the lock button – press the unlock button 3 times.
  • Release the lock button.

The driver’s door LED should flash to indicate correct programming. Repeat 4 to 7 for additional remotes up to a maximum of four. Wait 15 seconds before trying remote.

Instructions for FORD GALAXY PRODUCED FROM 1999 TO 2002

7M3959753,7M3 959 753 and compatible

    • Open and close the both front windows.
    • One of the key switch on the ignition and leave the key in this position.
    • Get out of the car, close the door and insert second key into driver’s door lock.
    • Turn the key to the unlock position 3 times ( key must be held in open position by 1 seconds ).
    • Remove the key.

The driver’s door LED will illuminate. Within 20 seconds:

  • Press and hold the lock button.
  • Still pressing the lock button – press the unlock button 3 times.
  • Release the lock button.
  • Open the door with the key manually ( not via remote control )

The driver’s door LED should flash to indicate correct programming. Repeat 4 to 7 for additional remotes up to a maximum of four.